Schematic editor with layout for stripboards

SCHEMATIC STRIPLAY – Easy Schematic Editor

Try this online editor at Schematic Striplay link.

Schematic and Layout Editor for Stripboars

This online schematic and layout editor is in alpha phase, order cialis online dream pharmaceutical made for intuitive schematic and layout designing. You don’t have to hassle with demanding tasks to learn, and you can take your chances without any installation in your Internet browser.

SCHEMATIC STRIPLAY – Schematic Editor

Begin stripboard layout job from drawing schematic in schematic editor

The application is consisting of two windows – schematic window and layout window which you may flip with top left buttons. The main operations are very easy, and at first you have the buying viagra in malaysia chose component from the component menu. Chosen component will be shown on desk so you can place it by dragging – hold left click and move to desired place and release left mouse button.

striboard schematic editorveroboard schematic editorIf you want to rotate, flip or edit component name and value double click on it, then the edit marks will appear. Orange circle/mark in schematic is for rotating the relative costs of viagra cialis levitra electronic symbol and with mouse click on that mark the symbol will rotate for 90 degrees clockwise.If the component is with more then 2 pins, below orange circle will be “flip” label and flip will be applied with click on it.

Two other blue circles/marks will show in “edit symbol” mode, one for component name and the other for component value. By double click on those marks you can change component name or value and while hold down click you can move marked text around an place it with mouse button release. The position of text is viagra pricelist relative to symbol, so while dragging those attributes will follow position symbol.

With click onto component pin or other net, wire net is beginning to draw. While drawing the net lines, right mouse click is for net orientation weather it will be from up to down or vice versa and viagra dosage forms you can end with click on other pin/net or double click on desk. Net lines are drawing interactively only horizontal or vertical, but you can move the ends of them by holding Ctrl key while dragging the point. However, diagonal net lines are not suited for starting new net on it, so if you click on diagonal lines program switches at another mode and cialis pharmacy paxil gives you opportunity to reposition diagonal net into two others – horizontal and vertical.

To delete schematic element, hold Alt key while clicking on it. If component is deleted it affects also on layout editor, and this component is no longer visible in both – schematic and layout editor.

SCHEMATIC STRIPLAY – Layout Editor for Stripboards

Continue stripboard layout job here in layout editor

stripboard layout of pwm regulator-controllerIn another window is layout editor for veroboards (stripboards), or other types of prototyping PCB-s. You can chose rasterboard or some of Atarado Smart’n'Easy stripboard-like PCB-s, rainbowpush discussion board buy viagra as well as breadboard.

All main leaded electronic components are stretchable so it can be stretched while holding down pin and move around. However this manipulation have the consequences to rotate component while other pin is still in place. There’s very few limits for manipulation so it depends of you would the components be ordered nice or ugly, viagra dosage information but the benefit is that you sometimes have to make compromises and put the component at angle and it may be the right solution for easy electronics prototyping.

Moving components are simple dragging while holding mouse button on component body and move on target place. But there is one more kind of moving, wholesale viagra associated with transistors with generic housing. When you’re over the center of the transistor housing with pointer, red dot appears and allows you to move whole component with leadings, not just the change of housing position while you dragging it by clicking near the edge of housing.

While editing your layout based on schematic editor, there is sample viagra meltabs significant benefits compared to some others veroboard layout editors.The first is that brake point at stripboards track are visually effective in manner that literally split track on two (or three at joint point) , which is easier to see and follow track connections.

The other thing is that all nets, which are represents as colours applies colour attribute to all connected tracks and our layout editing is easy to interactively follow to the end of layout editing process. The matter of breaking electrical rules with shortcuts are therefore showed as changing of visual attributes of shortcut nets, and those stripboard tracks are become red and dashed so alerting you to correct your layout.

SCHEMATIC STRIPLAY – Easy Schematic Editor
Try this online editor at Schematic Striplay link.
Schematic and Layout Editor for Stripboars
This online schematic and layout editor is in alpha phase, made for intuitive schematic and layout designing. You don’t have to hassle with demanding tasks to learn, and you can take your chances without any installation in your Internet browser.
SCHEMATIC STRIPLAY – Schematic Editor
Begin stripboard layout job from drawing schematic in schematic editor
The application is consisting of two windows – schematic window and layout window which you may flip with top left buttons. The main operations are very easy, and at first you have the chose component from the component menu. Chosen component will be shown on desk so you can place it by dragging – hold left click and move to desired place and release left mouse button.
If you want to rotate, flip or edit component name and value double click on it, then the edit marks will appear. Orange circle/mark in schematic is for rotating the electronic symbol and with mouse click on that mark the symbol will rotate for 90 degrees clockwise.If the component is with more then 2 pins, below orange circle will be “flip” label and flip will be applied with click on it.
Two other blue circles/marks will show in “edit symbol” mode, one for component name and the other for component value. By double click on those marks you can change component name or value and while hold down click you can move marked text around an place it with mouse button release. The position of text is relative to symbol, so while dragging those attributes will follow position symbol.
With click onto component pin or other net, wire net is beginning to draw. While drawing the net lines, right mouse click is for net orientation weather it will be from up to down or vice versa and you can end with click on other pin/net or double click on desk. Net lines are drawing interactively only horizontal or vertical, but you can move the ends of them by holding Ctrl key while dragging the point. However, diagonal net lines are not suited for starting new net on it, so if you click on diagonal lines program switches at another mode and gives you opportunity to reposition diagonal net into two others – horizontal and vertical.
To delete schematic element, hold Alt key while clicking on it. If component is deleted it affects also on layout editor, and this component is no longer visible in both – schematic and layout editor.
SCHEMATIC STRIPLAY – Layout Editor for Stripboards
Continue stripboard layout job here in layout editor
In another window is layout editor for veroboards (stripboards), or other types of prototyping PCB-s. You can chose rasterboard or some of Atarado Smart’n'Easy stripboard-like PCB-s, as well as breadboard.
All main leaded electronic components are stretchable so it can be stretched while holding down pin and move around. However this manipulation have the consequences to rotate component while other pin is still in place. There’s very few limits for manipulation so it depends of you would the components be ordered nice or ugly, but the benefit is that you sometimes have to make compromises and put the component at angle and it may be the right solution for easy electronics prototyping.
Moving components are simple dragging while holding mouse button on component body and move on target place. But there is one more kind of moving, associated with transistors with generic housing. When you’re over the center of the transistor housing with pointer, red dot appears and allows you to move whole component with leadings, not just the change of housing position while you dragging it by clicking near the edge of housing.
While editing your layout based on schematic editor, there is significant benefits compared to some others veroboard layout editors.The first is that brake point at stripboards track are visually effective in manner that literally split track on two (or three at joint point) , which is easier to see and follow track connections.
The other thing is that all nets, which are represents as colours applies colour attribute to all connected tracks and our layout editing is easy to interactively follow to the end of layout editing process. The matter of breaking electrical rules with shortcuts are therefore showed as changing of visual attributes of shortcut nets, and those stripboard tracks are become red and dashed so alerting you to correct your layout.
To be continued…
Path:

Alex

...... My Patent _=_=_=_=_= Prototyping PCBs

You may also like...